差分
このページの2つのバージョン間の差分を表示します。
次のリビジョン | 前のリビジョン | ||
blog:2018:2018-01-18 [2018-01-18 15:50] Decomo 作成 |
blog:2018:2018-01-18 [2020-12-03 12:46] Decomo |
||
---|---|---|---|
行 6: | 行 6: | ||
- | <align center> | + | <WRAP centeralign> |
- | <align center> | + | <WRAP centeralign> |
15628053167セクタを13時間37分でゼロフィルしたので、平均転送速度は155MB/ | 15628053167セクタを13時間37分でゼロフィルしたので、平均転送速度は155MB/ | ||
+ | smartmontoolsによるS.M.A.R.T.は↓な感じ。室温26℃、HDDへフルアクセスしてる状態での値である。 | ||
+ | < | ||
+ | smartctl 7.0 2018-12-30 r4883 [FreeBSD 12.0-RELEASE-p4 amd64] (local build) | ||
+ | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | |||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: | ||
+ | Device Model: | ||
+ | Serial Number: | ||
+ | LU WWN Device Id: 5 000cca xxxxxxxxx | ||
+ | Firmware Version: A4GNW907 | ||
+ | User Capacity: | ||
+ | Sector Sizes: | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Form Factor: | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: | ||
+ | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | ||
+ | Local Time is: Mon Jul 22 00:58:33 2019 JST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | |||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | |||
+ | General SMART Values: | ||
+ | Offline data collection status: | ||
+ | was never started. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: | ||
+ | Offline data collection | ||
+ | capabilities: | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | No Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: (1184) minutes. | ||
+ | SCT capabilities: | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | |||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME | ||
+ | 1 Raw_Read_Error_Rate | ||
+ | 2 Throughput_Performance | ||
+ | 3 Spin_Up_Time | ||
+ | 4 Start_Stop_Count | ||
+ | 5 Reallocated_Sector_Ct | ||
+ | 7 Seek_Error_Rate | ||
+ | 8 Seek_Time_Performance | ||
+ | 9 Power_On_Hours | ||
+ | 10 Spin_Retry_Count | ||
+ | 12 Power_Cycle_Count | ||
+ | 22 Helium_Level | ||
+ | 192 Power-Off_Retract_Count 0x0032 | ||
+ | 193 Load_Cycle_Count | ||
+ | 194 Temperature_Celsius | ||
+ | 196 Reallocated_Event_Count 0x0032 | ||
+ | 197 Current_Pending_Sector | ||
+ | 198 Offline_Uncorrectable | ||
+ | 199 UDMA_CRC_Error_Count | ||
+ | |||
+ | SMART Error Log Version: 1 | ||
+ | No Errors Logged | ||
+ | |||
+ | SMART Self-test log structure revision number 1 | ||
+ | No self-tests have been logged. | ||
+ | |||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | </ |